Sapling NTP 7000 Series Bedienungsanleitung PDF herunterladen (Seite 2)

IP System Description

Bogen’s IP Clock System is the perfect choice for a modern, state-of-the-art system with accurate

timekeeping. Utilizing the Power over Ethernet protocol, each clock can receive power and data

directly from an Ethernet cable, eliminating the need for excess wiring.

Bogen’s IP Clock System contains some amazing features such as:

IP Monitor Software - Supervise the entire clock system or make system-wide changes using •

this simple PC program.

Built-in Web Interface - Each clock has a web interface built right in, allowing the user to •

set features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and

international Daylight Saving Time, etc.

E-mail Alerts - Get notiﬁcation of any power failures, major time changes, NTP/SNTP server •

synchronization issues, display faults or mechanical failures all through e-mail.

Server Synchronization Redundancy - Store up to 10 internal or external NTP/SNTP server •

addresses to ensure synchronization in the event that one of the servers fails to communicate.

Energy Efﬁcient - Set the digital IP clocks to dim or turn off the display at a scheduled time for •

energy efﬁciency.

With all of these features available, Bogen’s IP Clock System is the perfect solution for your

timekeeping needs.

IP Monitor Software

Rolling out system-wide changes to all clocks in

your facility is simple with Bogen’s Clock Monitor

program. This easy-to-use PC program will display

all of the clocks conﬁgured to the clock network

and will give you the capability to send out a

preset conﬁguration to the entire system, saving

you from setting each clock individually.

The monitor program features a simple

messaging feature that allows for sending

numeric messages to all of the clocks or just

a selected few. The IP digital clocks can be

manually set to count down from any time that is

entered into the Monitor program. The Monitor

program also offers a simple way to control any

speciﬁc clock in the system. Need to adjust a

digital IP clock to go to a speciﬁc time zone or

set a speciﬁc clock to be in military time? No

problem. Just locate the clock in the Monitor

program and double click on it to open

its web interface.

IP Products

BCMA Series NTP Server

Bogen’s new BCMA Series NTP/SNTP Server is available in both a 7000 and 8000 version. The 8000 Series

comes fully equipped with a crisp LED readout and a backlit two line LCD display. Programming the

BCMA 8000 with up to 800 events is easy, thanks to the 2x8 rubber tactile keypad. The BCMA 7000 Series

features a bright LED display with two push buttons for simple programming.

Standard Features:

• LED display for a clear, accurate

readout

• Send NTP time out to any device

• Two line, backlit LCD display with 20

characters per line and a 2x8 rubber

tactile keypad (BCMA 8000 only)

• RJ45 input for synchronization to any

(S)NTP server

• Interfaces with other systems

• 12 or 24 hour mode

• Automatic biannual Daylight Saving

Time changes (domestic and international)

BCBP Digital and BCAP Analog IP Clocks

Standard Features:

• Available in four different voltage models

• Power over Ethernet (802.3af protocol)

• 24 VAC

• 110 VAC

• 220 VAC

• Extremely intuitive web interface built in

• Control all of your settings from brightness to

Daylight Saving Time through an easy-to-use

web interface

• Monitor your entire clock system

• View the status of your clock to ensure

communication

• Edit a speciﬁc clock’s settings or apply settings

to the entire clock system from one location

• Automatic e-mail generation to alert the user of

any errors, power failures or time changes

• Made in the U.S.A.

BCAP Series Features:

• Smooth surface metal case or smooth surface ABS

plastic case

• Side molded polycarbonate crystal

• BCAP Series offered in 12”and 16” round models

BCBP Series Features:

• BCBP Series offered in 2.5”or 4” high characters

in 4 or 6 digit displays

• Countdown feature for displaying time between

classes or breaks

• Elapsed timer capabilities with Bogen’s Control Box

• 12 or 24 hour display

• Conﬁgurable alternating time/date in both Ameri-

can and European formats

• Two levels of adjustable brightness

Bogen’s IP analog and digital clocks are some of the most technologically advanced clocks in the

industry. Each clock can be powered using the Power over Ethernet protocol and has a variety of

features that give the user maximum ﬂexibility for almost any application.

BCMA Series Options:

• GPS input for UTC synchronization

• Wireless transmitter/repeater for cor-

rection of Bogen wireless clocks

• Four or eight auxiliary relays with 800

event capability (BCMA 8000 only)

•

Countdown feature (BCMA 8000 option);

Digital clocks will count down a preset

amount of time when the relay

is activated

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Sapling NTP 7000 Series Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wanduhren Sapling NTP 7000 Series